Specialty

Items 1 to 10 of 54 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction
  1. High Temperature Capacitors (>175 Degrees C): World Markets, Technologies & Opportunities: FY 2012-2017 ISBN # 1-893211-90-8 (2012)

    Forecasted changes in temperature requirements in defense and downhole pump electronics have challenged the capacitor industry to produce new products that can operate in exceedingly higher temperatures for longer time periods of time. For years the operating temperature and available capacitance values of competing high temperature dielectrics was limited to about 200 degrees C and picofarad levels of capacitance. There was also the added problem of limited volumetric efficiency of the capacitors being consumed. Therefore, the trend has been to increase the operating temperature of the capacitors competing in the space, to increase the available capacitance values of the capacitors competing in the space, and to expand the product offering with respect to capacitor case size, configuration and performance for extended periods of time at such high temperatures. Multiple dielectrics are now employed to operate at elevated temperatures and include ceramic, tantalum, plastic film, mica, solid aluminum, glass, silicon, diamond-like and aluminum oxynitride. Ceramic, tantalum, plastic film, glass and diamond-like capacitors have established reliability in the high temperature arena, while solid aluminum, silicon and aluminum oxynitride are emerging technologies. Because of the end-markets into which these high temperature capacitors are sold include both defense and oil & gas related electronic sub-assemblies, these high temperature capacitors are usually subjected to additional rigors of extreme environments in addition to extreme temperatures, including enhanced vibration frequencies, high voltage environments, and radiation exposure. Subsequently failure modes for these “application specific” capacitors include delamination, tomb-stoning, thermal stress cracking, wild fluctuations in capacitance with temperature; and questionable insulation resistance. This study addresses the growing market for capacitors in the 175 degree C to 450 degree C operating temperature range, and forecasts the rate of global consumption over the next five years. Published June 2012, 132 Pages - ISBN # 1-893211-90-8 (2012)

    Learn More
  2. Competitive Analysis 2013

    Paumanok Publications, Inc. (Cary, NC USA) announced the release of their new market research report entitled “Competitive Analysis of The World’s Top Passive Component Manufacturers: FY 2013 ISBN # 1-893211-99-1 -2013.” This is a competitive analysis of the world's top 13 manufacturers of passive electronic components (capacitors, resistors and inductors). This study compares the financial performance of passive component manufacturers with respect to gross profit margin, spending on research & development, spending on SG&A; revenues by world region; revenues by end-use market segment; comparative stock valuation; passive component product portfolios; market strategies; market shares by each component sub-type; and costs to produce, including variable raw material cost comparisons. The report also offers a detailed SWOT analysis for each of the top vendors (Strengths, Weaknesses, Opportunities and Threats). The study also addresses the key financial metrics for each vendor over time, and shows the various changes in markets structure for FY 2013 compared to FY 2007. The study also offers market forecasts for capacitor, resistor and inductor consumption worldwide between 2013 and 2018. Vendors included in the report are AVX, Kemet, Murata, Nichicon, Nippon Chemi-Con, Panasonic, Rubycon, Samsung EMCO, Taiyo Yuden, TDK, Vishay, Walsin and Yageo. Published May 1, 2013, 160 Pages, 66 Figures; $2,750.00 USD.

    Learn More
  3. Supercapacitors: World Markets, Technologies & Opportunities: 2013-2018 Study Cover

    This new report from Paumanok Publications, Inc. covers the global market for carbon and hybrid supercapacitors with forecasts to 2018. The report addresses global supercapacitor demand by configuration (coin cell, radial, flatpack/SMD; screw terminal, snap-mount and module assembly); global value of supercapacitor demand by end-use market segment in transportation, consumer AV, renewable energy, professional electronics and infrastructure markets worldwide. The value of demand is also estimated based upon circuit application (Memory protection, energy recoup, actuated power and UPS system). Global consumption is estimated by world region in Asia-Pacific, Europe and the Americas, and supercapacitor point of sale analysis is also given for Japan, USA, China, Korea, Europe and Israel. Supercapacitor costs to produce are addressed, as are the corresponding markets for carbon materials, cans/sleeves, electrolytes, end seals, separator materials, electrode tab materials and lugs and lead wires. A competitive analysis is also given that addresses the activities of 40 companies in supercapacitors globally and offers complete assessment of worldwide sales and market shares. Forecasts are given based upon the value of consumption by supercapacitor type to 2018, the volume of small can and large can cell consumption to 2018, and the average unit selling prices for small can and large can supercapacitor cell consumption to 2018. Forecasts are also given for supercapacitors based upon consumption by world region and end-use market segment to 2018. Price: $1500.00 USD, Pages 71, Tables 28, ISBN #:0-929717-60-0 (2013) Published May 20, 2013.

    Learn More
  4. PCB RELAYS: World Markets & Outlook: 2013-2018 ISBN # 0-929717-30-9 (2013)
    Paumanok Publications, Inc. (Cary, NC USA) announces the release of their new market research report entitled "PCB Relays: World Markets & Outlook: 2013-2018." This report contains data points that include the global value, volume, and average unit pricing for PCB relays by type, including electromechanical, solid state and reed relays; global revenues by world region, global revenues by end-use market segment, global revenues by channel of distribution, competitive environment and sales and market share information; as well as forecast value, volume and pricing to 2018; as well as the forecasted consumption by relay type, world region, end-use market segment, and channel of distribution to 2018. 68 Pages, 24 Tables and Graphs; Published August 2013, Price: $1,500.00 USD. ISBN # 0-929717-30-9 (2013) Companies Discussed In This Report: Aleph, CEL, CIT, Clion, COTO, Crydom, Cynergy3, Deltrol, E. DOLD, Esterline, Fujitsu, Goodsky, Guardian, Hamlin, HASCO, HKE, Hongfa, IDEC, IR, IXYS, Microsemi, Naidian, NEC-Tokin, OMRON, Opto22, Panasonic, RelPol, Salzer, Sanyou, Sharp, Song Chuan, Songle, Standex-Meder, STPI, Struthers-Dunn, TE Connectivity, Teledyne, Vishay, Wanjia, Weidmuller. Paumanok Publications, Inc.- Component and Materials Market Research Since 1988. Learn More
  5. Conductive Polymer Capacitors Cover 2014

    This new market research report covers solid and liquid conductive polymer capacitor markets, technologies and opportunities with forecasts to 2019. The study includes the global markets for solid polymer molded chip tantalum, solid polymer molded chip aluminum (H-Chip), solid and liquid polymer vertical chip (V-Chip) aluminum electrolytic and liquid polymer radial leaded aluminum electrolytic capacitors worldwide. The study includes the value and volume of demand for conductive polymer capacitors by type and configuration as well as pricing for conductive polymer capacitors by type and configuration with value, volume and pricing forecasts to 2019. The study addresses the global market for conductive polymer capacitors by world region with forecasts to 2019 for conductive polymer capacitor consumption in China, Japan, Americas, Europe and Asia-Pacific regions. The study also addresses the conductive polymer capacitor market by type and configuration and end-use market segment in computers & peripherals, consumer audio and video imaging and home theatre electronics; power converter and industrial electronics, wireless access equipment, automotive electronics, telecommunications infrastructure and specialty electronics. The study also addresses the product line ups for 27 manufacturers of conductive polymer capacitors by type and configuration and has a competitive analysis for each product category based upon component operating voltage, maximum operating temperature, maximum capacitance value, equivalent series resistance and by solid polymer tantalum and aluminum case size. The study also addresses vendor market shares for each component sub-category including solid polymer molded chip tantalum, solid polymer molded chip aluminum (H-Chip), solid and liquid polymer vertical chip (V-Chip) aluminum electrolytic and liquid polymer radial leaded aluminum electrolytic capacitors worldwide. The study also compares the costs to produce for both tantalum and aluminum capacitors and takes a look specifically at the variable costs associated with raw material usage and supply for each dielectric. The study also addresses the global markets for conductive polymer materials consumed in the gloval capacitor industry including polythiophene, polypyrrole and polyaniline materials, as well as the various application methods for applying conductive polymers in the finished capacitor, including the popular dipping and electro-polymerization processes. The study forecasts the global market consumption value, volume and pricing for conductive polymer capacitors by type and configuration, world region and end-use market segments to 2019. Published January 2014; 257 Pages; $3,750.00 USD.

    Learn More
  6. High Capacitance BME MLCC:  World Markets, Technologies & Opportunities: 2014-2019

    This study analyzes the dynamic global market for high capacitance base metal electrode multilayered ceramic chip capacitors (MLCC). This study, which updates the 2000 and 2005 market studies of the same name, addresses the global market for MLCC with capacitance values from 2.2 microfarad to 330 microfarad for FY 2014. The study addresses the rapidly expanding value and volume of consumption for high capacitance BME MLCC and the raw materials consumed in its production. The detailed study addresses average unit pricing trends and directions; consumption by world region, production by country, consumption by end-use market segment, market shares and forecasts for consumption to 2019. The study also addresses the cost of goods sold for high capacitance MLCC as well as the supporting markets for ceramic dielectric materials, nickel electrode powders and pastes and copper termination powders, flakes and pastes. The study also offers a detailed technology roadmap for future developments in high capacitance BME MLCC that includes capacitor development, stacking abilities, nano-powder development in ceramic, nickel and copper, as well as long term forecasting for high capacitance BME MLCC materials consumption by type (Ceramic, nickel and copper); and for high capacitance BME MLCC by world region; MLCC and by end-use markets segment to 2019.

    Learn More
  7. Value-Added & Application Specific Ceramic Capacitors: World Markets, Technologies & Opportunities: 2015-2020

    FOCUS OF THIS REPORT:

    This market, technologies & opportunities report from Paumanok Publications, Inc. provides an in-depth analysis of value-added and application specific ceramic capacitor world markets, including high voltage ceramic capacitors, high frequency ceramic capacitor, high temperature ceramic capacitors; ceramic feed thru capacitors; ceramic safety capacitors (X&Y) and automotive under-the-hood ceramic capacitors for applications in specialty segments of the power conversion, telecom infrastructure, medical test & scan, medical implant, defense, oil & gas, semiconductor manufacturing equipment, specialty lighting and automotive market segments.

    REASON FOR THE REPORT:

    As mass produced ceramic capacitor products move to low-cost manufacturing regions, ceramic capacitor manufacturers in Japan, Korea, China, USA, Germany, UK and France must re-evaluate their existing production facilities in high-cost regions, and reposition their product portfolios to address markets that will remain localized. The majority of these markets require value-added and application-specific ceramic capacitors that can operate under high reliability specifications and in harsh environments. This market study sheds light on the fragmented, low volume, high value, high profit portion of the global ceramic capacitor industry.

    BENEFITS OF THE REPORT:

    This report gives detailed intelligence data on the specialty segment of the global ceramic capacitor market, where operating margins are the highest and where price is secondary to component quality and performance. As the low picofarad MLCC markets become inundated with suppliers, companies with smaller economies of scale must refocus all or part of their product portfolio to address more profitable segments of the market. This new focus should include application specific ceramic capacitors to increase profit margins and delay the continued price erosion in their overall ceramic capacitor product offering, and to understand the competitive environment, demand by world region, pricing, technology, and opportunities through detailed forecasts to 2020.

    PRODUCT FOCUS OF THE REPORT:

    • High voltage ceramic capacitors- >500 VDC

    • High frequency ceramic capacitors > 1GHz

    • High temperature ceramic capacitors> 200 Degrees C

    • Ceramic feedthru ceramic capacitors

    • Ceramic safety capacitors (X&Y)

    • Automotive Under-The-Hood Capacitors 125 to 175 Degrees C

    END-MARKET AND CUSTOMER SEGMENT ANALYSIS:

    • Automotive

    • Power Supplies

    • Telecommunications Infrastructure

    • Defense & Aerospace Electronics

    • Medical Test & Scan

    • Medical Implants

    • Oil & Gas Electronics

    • Semiconductor Manufacturing Equipment

    • Specialty Lighting Ballasts and Equipment.

    Published May 2015. 241 Pages, 115 Tables and Graphs; Price $2,750.00 USD.

    DOWNLOAD THE TABLE OF CONTENTS AT THE TOP OF THIS PAGE FOR A COMPLETE LISTING OF WHATS IN THIS REPORT.

    Learn More
  8. Opportunities for Passive Components in Class 7 & 8 Trucks and Tractors: Presentation
    This presentation addresses the current market for passive electronic components in heavy duty class 7 on 8 on-road and off-road trucks and tractors. Learn More
  9. Capacitors For Renewable Energy Systems: World Market Outlook: 2013-2018
    This new report from Paumanok Publications, Inc. analyzes the global market for capacitors consumed in renewable energy systems, including plastic film capacitors, aluminum electrolytic capacitors and EDLC supercapacitor markets in solar energy, wind turbine, tidal energy and geothermal markets worldwide. Learn More
  10. Strategies For Success In The Passive Electronic Component Industry
    This 219 page market study addresses the strategies for success that many of the top competitors employ to attain success in the global passive component industry. Learn More

Items 1 to 10 of 54 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction